Area Codes

667 Area Code: Baltimore's Newest Number, Explained

See exactly where the 667 area code sits in Maryland, how it joined the 410/443 stack in 2012, which Baltimore and Eastern Shore cities it covers, and why 10-digit dialing is required.

SK
Shahid Kathawala
Jul 25, 2026·7 min read
667 Area Code: Baltimore's Newest Number, Explained — hero graphic with regional coverage, dialing format, and history badges

Introduction

The Baltimore region of Maryland has used the 667 area code since 2012. It is the newest of three codes that share the same ground, layered on top of the older 410 and 443. Maybe a call from this prefix just landed on your phone. Maybe you run a business and want a fresh local number in Baltimore or Annapolis. Either way, the 667 area code works a little differently than most, and this guide explains how. You'll learn its geography, its history, the cities it reaches, and the dialing rules that come with it.

Key Takeaways:
  • The 667 area code has overlaid the same Baltimore and Eastern Shore territory as 410 and 443 since March 24, 2012.
  • It is the third and newest code in the Baltimore stack, so open numbers are usually the easiest to find.
  • Because it shares ground with 410 and 443, every local call needs the full 10-digit format.
  • A 667 number carries the same local presence as a 410 or 443 one, just with a fresher range.


Where Is the 667 Area Code Located?

Where Is the 667 Area Code Located?

This area code covers the eastern half of the state, centered on Baltimore. It does not carve out its own patch of the map. Instead, it sits on top of the exact same territory already served by 410 and 443. That means the 667 area code reaches from the city and its suburbs across the Chesapeake Bay to the Eastern Shore. There is no separate "667 zone," because it shares every mile with two older codes. What makes it unusual is simple: it was added purely to keep new numbers flowing.

  • 667 covers the Baltimore metro and its suburbs.
  • It stretches east across the bay to the Eastern Shore.
  • It runs on Eastern Time, like the whole region.
  • It shares its footprint with 410 and 443.

History and Origin of the 667 Area Code

History and Origin of the 667 Area Code

The 667 area code went into service on March 24, 2012. It was the third code added to the Baltimore region, after 410 in 1991 and the 443 overlay in 1997. By 2012, even two codes were running low on numbers, so regulators layered on a third. An overlay adds a new code to the same area without redrawing any lines or forcing anyone to switch. So no one with a 410 or 443 number had to change it. New phone lines simply started drawing from the 667 range.

How 667 Completes the Baltimore Code Stack

The 667 area code, 410, and 443 are not rivals or neighbors. They are three prefixes stacked on one region. A home on one street might have a 410 number while the business next door has a 667 number. You can read the story of the codes it joined in our guide to the 443 area code.

  • All three codes cover the identical Baltimore and Eastern Shore region.
  • A 667 number is no less local than a 410 or 443 number.
  • New lines are most likely to draw 667, the freshest of the three.
  • Neighbors can hold different codes on the very same block.

Cities and Communities Served by the 667 Area Code

This area code reaches a wide mix of communities across Maryland's eastern half. Baltimore anchors it as the largest city and a historic port. Around it spread suburbs like Towson, Glen Burnie, Dundalk, and Ellicott City. Columbia adds a large planned community in Howard County.

On the bay to the southeast lies Annapolis, Maryland's capital. The Eastern Shore across the Chesapeake adds Salisbury, Easton, and Ocean City with its beachgoers. Which of these markets a 667 number should serve is a decision in itself, and our area code guide can help you compare them.


Time Zone and Dialing Rules for the 667 Area Code

Every community in this area code runs on Eastern Time. That means Eastern Standard Time in winter and Eastern Daylight Time in summer, matching the rest of the region. The dialing rule is where the overlay shows its hand. Because the 667 area code shares the same ground as 410 and 443, seven digits alone can no longer tell two numbers apart. So callers must dial all 10 digits, area code included, for every local call. The Wikipedia entry on area codes 410, 443, and 667 lays out the full timeline.


Why Businesses Choose a 667 Area Code Number

Why Businesses Choose a 667 Area Code Number

A local number in this area code sends a clear signal. It tells customers a business belongs to Baltimore and the bay, not a call center three states away. That local trust runs deep in a region proud of its roots. Because 667 is the newest code, it is usually the easiest to find an available number in, which helps when you want a clean, memorable line.

That is the gap a cloud phone provider like Rozper closes. Rather than renting space in Baltimore, a business can get a local 667 number on a VoIP platform. Callers still see a Maryland number, and the calls reach the team wherever it actually works. Rozper runs this on a carrier-grade network with international coverage. A company can present itself as part of the Baltimore market while its sales or support staff sit somewhere else entirely. It establishes a local presence with no lease to sign.


How to Get a 667 Area Code Number

How to Get a 667 Area Code Number

Getting a new number in this area code is usually quick. Because 667 is the freshest code in the region, open numbers are plentiful. The process looks the same as it does anywhere else:

  1. Select a cloud or VoIP provider whose coverage includes Baltimore and the Eastern Shore.
  2. Search the open 667 numbers and settle on one that suits you.
  3. Confirm the number and link it to the phones or app your team already uses.
  4. Point incoming calls at any team, no matter where it is based.

Moving a number in from an old provider adds a single step. The business files a standard porting request, which typically wraps up within a few business days, and should make sure the existing line stays in normal use until the transfer finishes.


Conclusion

Area code 667 joined the Baltimore region in 2012 as the third code layered on top of 410 and 443. It covers the city, its suburbs, the state capital at Annapolis, and the Eastern Shore across the bay, all on Eastern Time. Because it shares that ground with two older codes, every local call in the region needs 10 digits. For residents, the 667 area code is simply the newest local prefix for Baltimore and eastern Maryland. For businesses, it's an easy way to claim a fresh, unmistakably local number.

Ready when you are
Ready to sound local in Charm City?
Rozper activates a 667 Maryland number in minutes, with call routing, voicemail, and CRM-ready tools. Book a free demo — no office in Maryland required.
Get a Demo


FAQs

When was area code 667 created?

It went into service on March 24, 2012, as the third code for the Baltimore region. It was added after 410 and the 443 overlay.

What cities does the 667 area code cover?

It covers the Baltimore metro and the Eastern Shore, including Baltimore, Annapolis, Towson, Columbia, Glen Burnie, and Salisbury. It shares this exact area with 410 and 443.

Do I need to dial 10 digits for local calls in this area code?

Yes. Because 667 overlays the same ground as 410 and 443, seven digits can't identify a number. Every local call needs all 10 digits.

Is area code 667 the same as area code 410?

They cover the same territory but are different prefixes. A number can be assigned 667, 443, or 410, and all are equally local.

What time zone does the 667 area code use?

Like 410 and 443, the 667 region keeps Eastern Time throughout. Standard and daylight saving time change on the same dates as across the East Coast.

Is a 667 number less local than a 410 number?

No. All three codes serve the identical Baltimore and Eastern Shore region, so a 667 number carries the same local presence.

Can a business outside Maryland get a 667 area code number?

Yes. Wherever a business is based, a VoIP provider can assign it a 667 number. Rozper, as one example, can configure the line with call routing and support for remote teams.

Why does the Baltimore region need three area codes?

Fast, steady growth kept using up numbers, so regulators added 443 and then 667 as overlays. Stacking codes let the region keep issuing numbers without changing anyone's existing line.

#area codes#Maryland#Baltimore#virtual numbers#local presence#business phone
Share
From the field to your stack

Want this running on your numbers?

No SDR phone tree. The person on the call has read the docs, can quote your contract live, and can spin up a POC on your traffic in under 24 hours.

The dispatch

One issue at a time. Zero filler.

Three picks from our editors, one chart from the network, and a single concrete idea you can take into your next standup.

  • Hand-picked posts — never an aggregator dump
  • Carrier-grade signal, not vendor hype
  • Unsubscribe in one click, no dark patterns

We don't share your address.